60 Hz
60 Hz
Ceiling installation fan, called HVLS (High Volume Low Speed), capable
to move large volumes of air at low rotation speeds.
Expected applications
The permitted applications are industrial: civil and livestock (e.g. warehouses, stables). The fan is completely dust-proof and can withstand rain or low-pressure water jets, making it ideal not only for indoor environments but also for outdoor or semi-outdoor environments.
Versions
The models are divided by type of power supply (single-phase 100/240V-50/60Hz or three-phase 200/480V-50/60Hz) and nominal diameter from 3m to 7m. The length of the
support pole is equal to 1.5 meters for all models.
Features
• Thermally protected EC (brushless) motor, three-phase or single-phase power supply. • Aerodynamically profiled anodized Al blades, equipped with fins (winglets) that decrease the resistance induced by the end vortices. • Control electronics for power management and operation control, complete with EMI/EMC filters to prevent the risk of possible electromagnetic disturbances, housed in the Al casting of the engine covers. Electronics includes:
• an isolated RS485 modbus communication bus, which allows the fan to be integrated into a BMS, • an isolated analog input, for speed regulation through an external potentiometer (optional) or other device operating with a 0-10 V signal.
• Integrated safety system in electronics that includes protection from overcurrents, short circuits, overtemperatures, overvoltages and undervoltages. In accordance with NFPA 72 (the US National Fire Protection Agency) requirements, the fan control system forces the fan to be turned off and blocked immediately upon receiving a water flow signal from the fire alarm system, so as not to compromise the effectiveness of any devices (sprinklers) installed.
• Sheet steel kit for ceiling installation including support pole (nominal length 1.5 m), pair of brackets and related metal hardware, supplied as standard. This kit ensures the correct and robust fixing of the device to the target ceiling in the most common installation methods.
• Optional kit, consisting of 4 tie rods, specifically designed to ensure an additional degree of axial stability. The adoption of the Kit is to be considered mandatory in cases where the chosen position for the installation of the fan: • exposes it to gusts of wind, • exposes it to the risk of accidental impacts with machines or equipment moving in its vicinity, • exposes it to the risk of contact with birds, • is located in a seismic zone or in any case subject to appreciable vibrations (e.g. industrial processes involving the use of hammers, industrial presses).
• Speed adjustable using potentiometer or remote control units VORT T, VORT T-HCS, VORT T PLUS and VORT MASTER (optional).
• IP65 engine protection rating.
| Model | 300 M | 300 T | 400 M | 400 T | 500 T | 600 T | 700 T |
| Voltage (V): | 100-240 | 200-480 | 100-240 | 200-480 | 200-480 | 200-480 | 200-480 |
| Max absorbed power at Max speed (W): | 410 | 500 | 290 | 300 | 730 | 850 | 790 |
| Max absorbed current at Max speed (A): | 1,5-5 | 0,9-1,8 | 1,3-3,5 | 0,7-1,1 | 1,2-1,9 | 1,4-2,8 | 1,3-2,5 |
| Max ambient temperature (°C): | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
| rpm max: | 140 | 140 | 75 | 75 | 80 | 60 | 50 |
| Max airflow (m3/h) AMCA 230-2023: | 79,400 | 79,400 | 103,000 | 103,000 | 205,000 | 253,800 | 330,800 |
| Max airflow (m3/h) AMCA 230-1999: | 112,287 | 112,287 | 145,663 | 145,663 | 289,911 | 358,924 | 467,817 |
| Max air speed (m/s): | 2,5 | 2,5 | 1,7 | 1,7 | 2,1 | 1,6 | 1,5 |
| Sound power Lw [dB (A)] - max speed | 67 | 69,1 | 62,8 | 62,5 | 67,5 | 67,3 | 74,5 |
| Sound pressure at 1m Lp [dB (A)] - max speed | 56 | 58,1 | 51,8 | 51,5 | 56,5 | 56,3 | 63,5 |
| Sound pressure at 3m Lp [dB (A)] - max speed | 46,5 | 48,6 | 42,2 | 42,0 | 47,0 | 46,8 | 54,0 |
| Sound pressure at 5m Lp [dB (A)] - max speed | 42 | 44,2 | 37,8 | 37,5 | 42,5 | 42,3 | 49,5 |
'+39 90 699 1