SLIMROOF 155 M ES

ROOF FAN WITH ELECTRONIC MOTOR AND ALUMINIUM COWL

MANUFACTURING FEATURES:

Protection cowl made of anticorrosive treated aluminum easily removable for motor and impeller maintenance (integrated folding system in models 500, 560 and 630).
The design of the cowl with a rounded shape is specific to minimize the risk of water ingress due to rain.
Structure in anticorrosive galvanized steel and support frame for adaptation to the roof with anti-bird protection grid.
High-efficiency backward-curved blade impeller with self-cleaning system. Reinforced polyamide impeller for models 155, 190 and 220. The rest of the models in aluminum.
EC technology uses integral electronic control to ensure that the motor always runs at optimal load and ensures efficient energy utilization. It incorporates an external rotor EC motor with high efficiency (IE4 for three phase motors and IE5 for single motors) and low noise level. Speed control through a 0-10V or PWM signal. 230V 50/60Hz single-phase power supply for models 155 to 310 and 400V 50/60Hz three-phase power supply for sizes 355 and 630. IP54 and motor class B insulation.

APPLICATIONS

Designed for deck or roof mounting, they are indicated for:

Smoke extraction.
Air renewal in all types of buildings and industries.
Working temperature range from -20ºC to 60ºC for models size 155-310, -25ºC to 60ºC for 355-450 sizes, -30ºC to 50ºC for size 500 and -30ºC to 40ºC for 560 and 630 models.

UNDER REQUEST

Fan (size between 250 and 450) with k-factor reading.

Fan

Max flow

460 m³/h

Weight

7 Kg

Motor

Power

0,055 kW

RPM Motor

3950

I max. 230 V

0,25

Weight

2 Kg

SLIMROOF 155 M ES

Design point

Service point

Degrees

RPM

Temp. max. (ºC)

Q (m³/h)

Ps (Pa)

Pd (Pa)

Pt (Pa)

Speed air (m/s)

Security coefficient

Mechanical total efficiency (%)

Total efficiency (%)

Pw_mec

Pw_mec (kW)

Pw_abs (kW) 1.2 Kg/m³

Pw_recom (kW)

Alternative point

SLIMROOF 155 M ES

A	B	C	D	E	F	G	H	ØL	PALA
435	350	310	120	80	30	19	230	155	38

SLIMROOF 155 M ES

Model

SWT 25 3P

Code

21673

Information

SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model

MFLAC 18/7

Code

20231

Information

CONECTION FLANGE

MANUFACTURING FEATURES

• For axial (inlet and outlet) and centrifugal (inlet) fans.

UNDER REQUEST

• Versions in stainless 304 and stainless 316.

Model

POT (REGC)

Code

12828 (20146)

Information

SPEED CONTROLLER FOR EEC MOTOR

MANUFACTURING FEATURES

• Speed remote controller for EEC motors.
• Adjusts the flow rate in a range from 0 to 100% at a maximum distance of 10m.
• It can be recessed or mounted on a wall. Can be installed outdoors.
• Working temperature from 0 to 40ºC.

Model

BAD 5

Code

20766

Information

CIRCULAR-CIRCULAR ANTI-VIBRATION FLANGE

MANUFACTURING FEATURES

• Circular-circular coupling flange through anti-vibration canvas.
• Fire resistance M0: from -50ºC to +200ºC in continuous and 400ºC/2h

Model

PMR

Code

20841

Information

SPEED CONTROLLER WITH SAFETY SWITCH FOR EEC MOTOR

CONSTRUCTIVE FEATURES
• Remote control of speed regulator for EEC motors.
• Allows you to adjust the flow in a range from 0 to 100%, at a maximum distance of 10m.
• Stop-start safety switches according to IEC 60947-1 and IEC 60947-3.
• IP66 and always equipped with an auxiliary contact.
• Useful for cutting off the power before handling the fan.
• Working temperature from -20ºC to 40ºC.

Model

BTI 310 D=0 C=B

Code

20759

Information

INCLINED ROOF FAN SUPPORT

MANUFACTURING FEATURES

• Inclined support for roof fans , TORRETTE TRS EC, TORRETTE TRK R, and the resulting fans combining with the KIT TE and KIT TM

In the code, indicate the pitch instead of "XX"

UNDER REQUEST

• Specific inclination.

Model

KV SLIMROOF 155-190

Code

20824

Information

ENKELROOF VERTICAL DISCHARGE

MANUFACTURING FEATURES

Accessory to convert the ENKELROOF roof fan to vertical discharge.
• Manufactured in aluminuim

Model

SILC-MINI 160 C

Code

20818

Information

CIRCULAR SOUND ATTENUATOR IN GALVANISED STEEL

The sound attenuators are used to absorb the noise in air conditioning or ventilation ducts.

Casing in galvanized steel, thickness 0,8 mm;
Acoustic material in mineral wool 50 Kg /m³ with protection against erosion by glass fiber fire resistance M0 and extended metal sheet.

Silencers designed for roof fan duct system mounting.