60 Hz
60 Hz
CARBON MONOXIDE CONTROL PANEL
DESCRIPTION
The CO-MASTER carbon monoxide detection system has been designed for use in car parks where CO can accumulate. This system is certified according to the UNE 23300:1984 regulation, which fulfi ls the requirements of Spanish Royal Decree 2367/1985 and the Spanish Technical Building Code [Código Técnico de Edificación].
The range of CO-MASTER carbon monoxide control panels is made up of 3 models; 1, 2 and 3 zones are available to cover all the requirements of small and large installations.
Each module includes a display showing the CO concentration of the zones. Each of them can control the air renewal group manually or automatically. The automatic control lets you work in an advanced mode in which the overall system’s power consumption is reduced. In order to obtain this reduction, the module performs algorithms to minimize the air renewal output activations by taking the individual measurement of each detector in the zone.
Each zone module lets you connect up to 32 CO-SENS or carbon monoxide detectors. The connection to the module is done through 2 wires, the detectors may be distributed along 2,000 meters in length and each detector covers 200 m2; this value is defi ned as the maximum surface in current legislation.
The CO-MASTER system can control a speed regulator through the optional . The speed regulator control is focused on minimizing the power consumption of the overall system, and also reduces the noise level of the air renewal group.
FEATURES
APPLICATIONS
Car parks or other places where concentrations of CO can accumulate.
* It is necessary to buy a so that the control panel can govern the fans.
DESCRIPTION
Casals CO-SENS range of detectors forms part of the CO-MASTER detection system. These have been developed and certified according to UNE 23300:1984 regulation and the Spanish Technical Building Code [Código Técnico de Edificación].
The CO-SENS detector has been developed using the latest technological advances. Their novel design makes this range one of the most elegant in the market, ideal for any type of installation and especially for those where a balance between functionality and aesthetics is needed.
The electrochemical cell and the algorithms used to detect the concentration of CO enable the CO-SENS to provide high reliability and precision in CO detection. The CO-SENS has 1 ppm resolution and the detector’s response time is less than 10 seconds.
CO detectors are insensitive to polarity and are connected to the CO-MASTER carbon monoxide control panels through two wires. Any wiring topology is supported to adapt the system to the installation’s requirements. The connection line can support up to 32 CO detectors with a maximum length of 2 km.
The detectors are designed to be used in places where CO detection points must be placed on the ceiling and on the wall.
FEATURES
APPLICATIONS
Car parks or other places where concentrations of CO can accumulate.
'+39 90 699 1