VORT HRW-ALL 100 DF

decentralized double-flow controlled mechanical ventilation system (VMC) with an enthalpy heat recovery unit. The system automatically introduces outdoor air, heating/cooling the incoming air by recovering heat from the extracted air.

The appliance can be controlled:
1.From the HMI control panel. For the wall-mounted version the HMI display is built-in on the appliance side. For semi-recessed and recessed versions, the HMI display must be installed on a wall.
2.Via “VORTICE HRU” App, available for both iOS and Android systems.

The appliance is equipped with anti-freeze protection and a built-in Wi-Fi module, which allows connection with other devices, control via the “VORTICE HRU” App, and saving configurations on the cloud. The product can be combined with an internal air quality sensor (for example one of the products from the “BRA.VO S” range) and with an external atmospheric monitoring service. 
Note: always install the equipment in areas where the wifi signal coverage is optimal to allow the device to constantly communicate with the cloud and work effectively, for the best possible user experience.
It is available in three versions that differ by the type of installation.

“VORT HR W-ALL 100 DF W” for wall installation, with built-in HMI display.
Body and front cover in ABS material. Painted steel aesthetic sheet.
Enthalpy heat exchanger
ON / OFF switch. It is also possible to switch off the appliance via the “VORTICE HRU” app.
One F7 filter (ISO ePM1 60%)
One G4 filter (ISO Coarse 60%)
Supply motor (pos. 5) and extraction motor
4 air temperature probes: internal, external, exhaust, supply and a relative indoor humidity probe
HMI display, built-in on the side of the device
Built-in WiFi module equipped with pairing button
2 rain protection ventilation hoods - Ø100

“VORT HR W-ALL 100 DF SR” for semi-recessed installation with remote HMI display.
Body and front cover in ABS material.
Enthalpy heat exchanger
ON / OFF switch. It is also possible to switch off the appliance via the “VORTICE HRU” app.
One F7 filter (ISO ePM1 60%)
One G4 filter (ISO Coarse 60%)
Supply motor (pos. 5) and extraction motor
4 air temperature probes: internal, external, exhaust, supply and a relative indoor humidity probe
Metal sheet box for wall recessing
One adapter for corrugated hose. Installation is optional. The adapter is used as additional air intake spigot from another room.
Built-in WiFi module equipped with pairing button
2 rain protection ventilation hoods - Ø100
HMI display, for remote installation

“VORT HR W-ALL 100 DF R” for recessed installation with remote HMI display.
ABS body and paintable PS cover. Galvanized steel sheet box for recessing into the wall.
Enthalpy heat exchanger
ON / OFF switch. It is also possible to switch off the appliance via the “VORTICE HRU” app
One F7 filter (ISO ePM1 60%)
One G4 filter (ISO Coarse 60%)
Supply motor (pos. 5) and extraction motor
4 air temperature probes: internal, external, exhaust, supply and a relative indoor humidity probe
Metal sheet box
2 adapters for corrugated pipe for immission and extraction of air from and to the inside.
Built-in WiFi module equipped with pairing button
2 rain protection ventilation hoods - Ø100
HMI display, for remote installation