VORT HR AVEL 550

• Internal structure with double panelling (sandwich) in galvanized steel sheet; internal insulation of 20 mm thickness, density 42kg/m3.
• White painted steel sheet aesthetic panelling (RAL9003).
• Inlet and outlet ducts compatible with the combination of tubes with a nominal diameter of 160 mm.
• Pair of EC (brushless) driven fan motors of the external rotor type, with shafts mounted on ball bearings to ensure a virtually "maintenance free" operationdirectly coupled to centrifugal impellers with inverted blades to guarantee high aeraulic efficiency. 3 operating speeds, independently adjustable at the time of installation.
• High efficiency cross flow counter current heat exchanger, made of plastic resin (PS).
• Automatically activated antifreeze protection, to prevent the formation of frost at the heat exchanger.
• Motorized auto-activated by-pass damper, to guarantee the comfort of the occupants in the environments enslaved in the middle seasons, or in any case when the external temperature does not require the action of the heat exchanger.
• Control panel, placed on the upper cover of the electrical panel of the unit, for:
• the switching on and off of the product.
• The initial configuration of the product.
• The manual setting of the operating mode.
• The programming of the operation.
• The display of the time and ambient temperature.
• Automatic management of the product and monitoring of its correct functioning (any malfunctions are highlighted through error messages displayed on the display)
• Indication of saturated filter status on the display.
• The system diagnostics.
• The update of the installed firmware release.
• Pair of filters Class ePM1 70% (F7), easily accessible for periodic maintenance. The blocking status of the filters is indicated visually on the control panel.
• Condensate collection tank with exhaust systems.
• Bracket for wall installation supplied as an accessory; possibility of floor installation by means of special anti-vibration feet provided as an option.