50 Hz
50 Hz
CIRCULAR AXIAL JET FAN 400ºC/2h
MANUFACTURING FEATURES:
The VORT JET-A F400 models are composed of an axial fan and two silencers.
FAN:
•Axial fan with reinforced tubular casing, made of steel sheet. The connection box is accessible by the side from a removable door.
•Standard asynchronous squirrel-cage motor with IP-55 protection and Class H insulation, CERTIFIED 400ºC/2h. Standard voltages 400V(Y) 50Hz) for 1 speed motors and 400V(D) 50Hz for 2 speed motors.
SILENCERS:
•Casing in galvanized steel. Inner duct made of perforated galvanized steel sheet.
•The silencers are filled with mineral wool with high acoustic absorption properties, preventing most of the fan noise to be propagated.
•Unidirectional VORT JET-A F400 UN is equipped with a protection guard at the inlet side and a deflector at the outlet. The deflector directs the air away from the ceiling and obstacles like beams or ducting, sweeping the whole volume of air to the closest extraction point.
•Reversible VORT JET-A F400 RE is equipped with a protection guards on both sides.
APPLICATIONS:
•Conceived for car parkings and large spaces where polluted air, or smoke from an accidental fire, needs to be removed effectively.
•An optimized design minimizes the height needed for their installation and assures a silent operation.
•Maximum working temperature: 60ºC.
Official homologation by the European laboratory APPLUS according to EN 12101-3:2015
Certification Nr: 0370-CPD-1325
| A | B | F | G | H | I | K | L | M | O | ØC | ØD | ØE | Thrust (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1880 | 720 | 8x45º | 440 | 500 | 122 | 506 | 456 | 392 | M8 | 500 | 401 | 450 | 58/14 |
Safety switch for local disconnection of 400ºC/2h ventilation equipments according to UNE-EN 12101-3.
Suited for direct control of motor in AC 3 operation category
Equips two auxiliary contact.
MANUFACTURING FEATURES
• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.
*Máx. thermal current air (A)
Designed for controlling fan motors speed in HACV applications. Ultra compact installation, simple cabling, easy parameterization and wide standard functions. Integrated control unit panel with digital dial. PID card. Certifications: CE/UL/CSA/EN/GOST/CCC. Protection Marking: IP20.
IREM/IRET INVERTER 230: Entrance 230V I, exit 230V III
IREM/IRET INVERTER 400: Entrance 400V III, exit 400V III
EMC filter incorporated for models from 47A (included)
*Lineal load rated current
**Quadratic load rated current
Safety switch for local disconnection of 400ºC/2h ventilation equipments according to UNE-EN 12101-3.
Suited for direct control of motor in AC 3 operation category
Equips two auxiliary contact.
MANUFACTURING FEATURES
• Support of great radial and axial elasticity.
• These low-profile, compact and elastic supports control the three directions of movement with large deformations in the rubber.
• It consists of two parallel armour adhered to the bell-shaped rubber and by a base with handles.
• These supports with handles have a threaded hole in their upper frame and are easy to install and fix.
• The steel protection washer allows it to withstand overloads by increasing its rigidity and protects the rubber from dripping hydrocarbons.
• Elastomer type NR or high quality elastomer. Working temperatures between -40ºC and + 70º C.
• Taking into account the tolerances of hardness in the elastomers, the mechanical characteristics of these series may differ.
• Range of 6 sizes and 3 different hardnesses (45-60-75) to fit a load range between 2 Kg and 1300 Kg.
1. Soft: hardness A 45
2. Average: hardness B 60
3. Hard: hardness C 75
APPLICATIONS
• Very appropriate in the elastic suspensions of machines that present vibrations of horizontal components.
MANUFACTURING FEATURES
• Metal insulators designed to work with compression with 85% insulation according to the following arrows (travel in mm) and rpm:
Arrow (mm.) r.p.m.
20 mm >600 r.p.m.
30 mm >500 r.p.m.
• Made of high quality elastic steel, with rectangular base and rubber mat to improve the grip. It treats of a resistant product and easy assembly, that avoids all type of vibrations of the fans to the structure of the premises.
• Operating temperature from -45 ° C to + 120 ° C.
APPLICATION
• To install under machines with rotating components, ventilation groups, fans, ventilation boxes, etc.
'+39 90 699 1
APPLUS CERTIFICATE