50 Hz
50 Hz
• Galvanized steel sheet casing, internally covered with fire-resistant sound-absorbing material (DIN 13501)
• Nominal diameter for pipe connections of 125 mm.
• Brushless EC motors with shafts mounted on ball bearings, directly coupled to centrifugal impellers; 3 speeds can be set during installation.
• High efficiency cross-flow heat exchanger in plastic (polyethylene).
• 100 % by-pass with automatic actuation.
• Automatic activation system to prevent ice formation on the heat exchanger.
• 2 filters class ePM10 50% (F5). Filter class ePM1 70% (F7) available as an option for the delivery line.
• Electronic control equipment.
• Tie rods for suspended installation supplied.
Class A
H = enthalpy exchanger
| A | B | C | D | E |
|---|---|---|---|---|
| 1183 | 740 | 288 | 1287 | 650 |
ELECTRIC HEATER
filter
filter
BRA.VO S1: Multisensor control unit for monitoring Temperature, Relative Humidity and VOC.
BRA.VO S2: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC, PM2.5 and PM10
BRA.VO S3: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC and CO2.
BRA.VO S4: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC, PM2.5, PM10 and CO2.
Compatible Apple homekit, designed for monitoring the main indoor pollutants, can take advantage of the BRA.VO architecture to allow integration and communication between devices connected to the Cloud.
BRA.VO S is equipped with an electronic suite able to detect environmental parameters, through special sensors to achieve optimal comfort levels for the occupants.
A coloured light signal, projected on the support surface and also visible along the upper profile of the product, indicates whether the air quality perceived by the sensors is normal (white colour) or if one of the pollutants detected exceeds the threshold of acceptability (yellow color); at the same time, a notification is sent to the user’s smartphone that can monitor the status of the sensors via the BRA.VO App (downloadable from the IOS device applestor or from the Google Store for Android devices).
The light signal also appears when the user queries BRA.VO S by placing the fingers in the center of the upper face.
The device is powered through a mini USB-B type port and the power cord can be housed in two different positions along the base to facilitate horizontal positioning on a support plane or vertical wall.
BRA.VO S1: Multisensor control unit for monitoring Temperature, Relative Humidity and VOC.
BRA.VO S2: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC, PM2.5 and PM10
BRA.VO S3: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC and CO2.
BRA.VO S4: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC, PM2.5, PM10 and CO2.
Compatible Apple homekit, designed for monitoring the main indoor pollutants, can take advantage of the BRA.VO architecture to allow integration and communication between devices connected to the Cloud.
BRA.VO S is equipped with an electronic suite able to detect environmental parameters, through special sensors to achieve optimal comfort levels for the occupants.
A coloured light signal, projected on the support surface and also visible along the upper profile of the product, indicates whether the air quality perceived by the sensors is normal (white colour) or if one of the pollutants detected exceeds the threshold of acceptability (yellow color); at the same time, a notification is sent to the user’s smartphone that can monitor the status of the sensors via the BRA.VO App (downloadable from the IOS device applestor or from the Google Store for Android devices).
The light signal also appears when the user queries BRA.VO S by placing the fingers in the center of the upper face.
The device is powered through a mini USB-B type port and the power cord can be housed in two different positions along the base to facilitate horizontal positioning on a support plane or vertical wall.
BRA.VO S1: Multisensor control unit for monitoring Temperature, Relative Humidity and VOC.
BRA.VO S2: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC, PM2.5 and PM10
BRA.VO S3: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC and CO2.
BRA.VO S4: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC, PM2.5, PM10 and CO2.
Compatible Apple homekit, designed for monitoring the main indoor pollutants, can take advantage of the BRA.VO architecture to allow integration and communication between devices connected to the Cloud.
BRA.VO S is equipped with an electronic suite able to detect environmental parameters, through special sensors to achieve optimal comfort levels for the occupants.
A coloured light signal, projected on the support surface and also visible along the upper profile of the product, indicates whether the air quality perceived by the sensors is normal (white colour) or if one of the pollutants detected exceeds the threshold of acceptability (yellow color); at the same time, a notification is sent to the user’s smartphone that can monitor the status of the sensors via the BRA.VO App (downloadable from the IOS device applestor or from the Google Store for Android devices).
The light signal also appears when the user queries BRA.VO S by placing the fingers in the center of the upper face.
The device is powered through a mini USB-B type port and the power cord can be housed in two different positions along the base to facilitate horizontal positioning on a support plane or vertical wall.
BRA.VO S1: Multisensor control unit for monitoring Temperature, Relative Humidity and VOC.
BRA.VO S2: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC, PM2.5 and PM10
BRA.VO S3: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC and CO2.
BRA.VO S4: Multisensor control unit for monitoring Temperature, Relative Humidity, VOC, PM2.5, PM10 and CO2.
Compatible Apple homekit, designed for monitoring the main indoor pollutants, can take advantage of the BRA.VO architecture to allow integration and communication between devices connected to the Cloud.
BRA.VO S is equipped with an electronic suite able to detect environmental parameters, through special sensors to achieve optimal comfort levels for the occupants.
A coloured light signal, projected on the support surface and also visible along the upper profile of the product, indicates whether the air quality perceived by the sensors is normal (white colour) or if one of the pollutants detected exceeds the threshold of acceptability (yellow color); at the same time, a notification is sent to the user’s smartphone that can monitor the status of the sensors via the BRA.VO App (downloadable from the IOS device applestor or from the Google Store for Android devices).
The light signal also appears when the user queries BRA.VO S by placing the fingers in the center of the upper face.
The device is powered through a mini USB-B type port and the power cord can be housed in two different positions along the base to facilitate horizontal positioning on a support plane or vertical wall.
'+39 90 699 1
USER MANUAL