VORT HR 450 AVEL D H

• Expanded polypropylene (PPE) interior details.
• Connecting outlets for pipes with a nominal diameter of 160 mm.
• 2 EC (brushless) motors of the type with external rotor controlled at constant flow, with shafts mounted on ball bearings each combined with a centrifugal impeller with forward blades; 4 speeds independently selected at the time of installation.
• High efficiency plastic counter-current flow type heat exchanger (PS).
• 100% filtered mechanical by-pass with automatic actuation.
• Automatic activation system to prevent ice formation on the heat exchanger.
• 3 ISO Coarse 90% (G4) class filters, placed respectively on the extraction tube, on the delivery tube and for the by-pass. Optional ePM10 50% (M5) and ePM1 55% (F7) filters available for supply line and by-pass.
• Condensate collection tank with discharge device.
• Control electronics with LCD display, for:
• on and off,
• the initial configuration,
• the choice of operating speed,
• weekly programming of operating procedures,
• monitoring of correct operation (any anomalies are shown through error messages on the display),
• the display of the operating state (set speed, by-pass status, active defrosting procedure, pre and/or post heater on, if any),
• the indication of saturated filters.
• Support brackets for wall installation included in the standard equipment.
• Possibility of enslavement to external environmental sensors (optional), for automatic management of product operation.
• Possibility of integration in domotic environment through Modbus communication protocol.

H version: enthalpy exchanger