50 Hz
50 Hz
CENTRIFUGAL BOX WITH FILTER AND EXTERNAL ROTOR EC MOTOR
MANUFACTURING FEATURES
• Inline ventilation box made of galvanized steel for duct connection. Box with particle filter(s) integrated. The box is available with a filter ISO Coarse≥60% (G4) or with double filtration satge ISO Coarse≥60% (G4) + ePM1≥50% (F7). Easy filter maintance due to Removable filter holder frame from both from the top and from de bottom. Optimized air intake to maximize performance.
• Plug-type fan with self-cleaning impeller with back curved blades (backward), high performance and single inlet, direct driven. Dynamically balanced to minimize noise and vibration. Polyamide reinforced impeller for models 155 and 190 and aluminum impellers for the rest.
• High efficiency (IE4 for three phase motors and IE5 for single motors), low noise external rotor EC motor. Speed control through a 0-10V or PWM signal. Single-phase 230V 50/60Hz power supply for models 155 to 310 and three-phase 400V 50/60Hz for sizes 355 and 450. IP54 motor and class B insulation.
• The box is supplied with a safety switch with potentiometer for a total regulation
• Circular suction mouth to facilitate duct connection. Open outlet.
APPLICATIONS
Designed for duct installation, they are indicated for:
- Air renewals in simple flow residential, commercial and controlled mechanical ventilation (CMV) applications.
Working temperature range from -20ºC to 60ºC.
UNDER REQUEST
• Fan (size between 250 and 450) with k-factor reading.
| A | B | C | D | E |
|---|---|---|---|---|
| 453 | 484 | 363.5 | 300 | 54 |
MANUFACTURING FEATURES
• Speed remote controller for EEC motors.
• Adjusts the flow rate in a range from 0 to 100% at a maximum distance of 10m.
• It can be recessed or mounted on a wall. Can be installed outdoors.
• Working temperature from 0 to 40ºC.
MANUFACTURING FEATURES
• Circular outdoor flange with bird guard made of galvanized steel.
MANUFACTURING FEATURES
• Allows customization of outlet’s position and shape.
• Made of galvanized steel.
MANUFACTURING FEATURES
• Allows duct connection.
• Made of galvanized steel.
Filtration for air treatment units equipped with a pre-filter upstream, and air-conditioning units.
• High filtration area, high efficiency, compact and economic filter.
• Media: Mini pleat fiberglass paper
• Frame: Galvanized steel
• Maximum T° in continuous service: 100°C
• Humidity: 100% RH
• Tested for food contact according to CE 1935/2004
• Certified for microbial development (ISO 846-VD 6022)
Filtration for air treatment units equipped with a pre-filter upstream, and air-conditioning units.
• High filtration area, high efficiency, compact and economic filter.
• Media: Mini pleat fiberglass paper
• Frame: Galvanized steel
• Maximum T° in continuous service: 100°C
• Humidity: 100% RH
• Tested for food contact according to CE 1935/2004
• Certified for microbial development (ISO 846-VD 6022)
Filter cells for rough primary filtration for air treatment units
High filtration area, light filter, rigid and easy to compact. 100% Incinerable and water repellent
Media: synthetic thermo pleated
FiberPlast frame
Maximum temperature in continuos service: 70ºC
Humidity 100%HC
Tested for food contact according to CE 1935/2004
'+39 90 699 1
USER MANUAL