TWIN QBK COMFORT
Model
TWIN QBK COMFORT 9/9 M6 0,13kW
Code

TWIN QBK COMFORT 9/9 M6 0,13kW

DOUBLE CENTRIFUGAL FAN IN SOUNDPROOF CABINET WITH SANDWICH PANELS

MANUFACTURING FEATURES
• Impellers made of polyamide reinforced with fibreglass for models 7/7, 9/9, 10/10 and 12/12, other models made of galvanized steel sheet.
• VORTICENT CRB range fans assembled in soundproof cabinets.
• Ventilation box with 30 mm aluminum profile structure, nylon corners, galvanized sandwich panels with internal insulation rockwool (25mm thickness) class A1 (non-combustible) of 90kg/m3 density. All panels are equipped with "fastening system" for the quick assembly and disassembly whenever required, either for cleaning, maintenance or exchanging of panels.
• Cable exit through cable glands.
• Easy access through lateral panel.
• Changeable rear, bottom or top inlet cover.
• Closed motors specially designed by Casals. Extruded aluminium motor housing. Totally enclosed wiring box. IP-55 motor protection and rated class F insulation. Standard voltages 230V 50Hz for single phase and 230/400V 50Hz for three phase motors.

• Fans can run separately or simultaneously.

APPLICATIONS
Designed for inline installation, indoor or outdoor assembly, they are suitable for:
• Air renewal in buildings and industries.
• Maximum working temperature: 50ºC.

UNDER REQUEST
• 3 speed fans.
• Impeller made of galvanized sheet.

* All data are referred to a single working fan. If both fans are working at the same time, data should be twice (x2) except for weight.

Fan

Max flow
2130 m³/h
Weight
66 Kg

Motor

Power
0,13 kW
RPM Motor
940
Capacitor
6µF 400V
I max. 230 V
1,3
Size
STC80
Weight
4.7 Kg
Efficiency
66.8 %
FP
0.99
TWIN QBK COMFORT 9/9 M6 0,13kW
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

TWIN QBK COMFORT 9/9 M6 0,13kW

Dimensions scheme
A B C D E F H I J K
1100 550 550 355 57.5 137.5 235 315 490 490

TWIN QBK COMFORT 9/9 M6 0,13kW

Electrical scheme

TWIN QBK COMFORT 9/9 M6 0,13kW

Model
IREM-EMC 1,5
Code
21921
Information
MANUAL SINGLE PHASE SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for sinus wave speed control. Only available for single phase fans.
• Terminal wiring.
• Minimum speed adjustable and potentiometer speed control.
• Sealed box IP-54 box. Light switch pilot.
• EMC filter according to the En55014 Standard.

Model
SWT 25 3P
Code
21673
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)