50 Hz
50 Hz
BTI + ACMP+AMC MOUNTED
Suitable for install both CMP-HUT and ASIL in a roof fan using a BTI (apti)
Made of galvanized steel
| A | B | C | D | E | F |
|---|---|---|---|---|---|
| 570 | 300 | variable fº(XX) | XXº | 485 | 530 |
Depression damper for ascending air flow in the intake. The slats block the passage of air when the fan is stopped while when the fan is running the slats move by depression allowing the passage of air. Robust U-shaped frame. The special holes in the corners allow a connection with common union systems on the market such as a duct working in plenum mode. It maintains the overpressure or depression inside a room with respect to the outside or another adjoining room.
MANUFACTURING FEATURES:
- Galvanized steel frame, U-shaped to install in a duct.
- Aluminum slats.
- Ø12 shafts in galvanized steel.
- Ø12 bronze bushings.
- Suitable for 400°/2h (not certified) and temperatures below zero.
- It can be installed directly to the fan, although the use of the frame (B CMP) is recommended.
- Suitable for speed 18 m/s and with some turbulence.
Support for circular accessories such as silencers, BAD anti-vibration flanges and AC connection flanges on the BTI (apti) using AMC.
Support for circular accessories such as silencers, BAD anti-vibration flanges and AC connection flanges on the BTI (apti) using AMC.
Support for circular accessories such as silencers, BAD anti-vibration flanges and AC connection flanges on the BTI (apti) using AMC.
'+39 90 699 1